Hawai‘i BUILDING ENERGY CODES

Building energy codes are perhaps the most cost-effective means of reducing energy use while providing new homes and buildings with improved comfort and safety. These codes are updated nationally every three years and embody continuous improvements in building materials, windows, cooling equipment, water heating, and lighting.

CURRENTly enforced county ENERGY CODE: 2018 IECC

In December 2020 the Hawaii State Building Code Council (SBCC) adopted the 2018 International Energy Conservation Code (IECC) with amendments. The code sets energy efficiency requirements for both residential and commercial buildings. The state energy code was then sent to the counties for adoption.

The county path involves review by the Corporation Councils followed by County Council hearings, amendments, adoption, and approval by the mayors. The code is then enforced via the plan checking and site inspection process. As of 2024, all four counties have adopted the 2018 IECC (some with additional county specific amendments) and these are the currently enforced energy codes for new construction.

Energy Code Checklists

Here you can find the state energy codes and county specific energy code checklists.

Commercial and High-rise residential

Low-rise residential

PLANS FOR Future codes

Future IECC measures will include working with the utilities to network homes and buildings using clean electrical sources to create integrated grids at the campus and community level. This will involve customers voluntarily (in exchange for lower utility prices) engaging in a demand response program, wherein they agree to have some of their electrical power curtailed when the utility is running short of supply. The time of use pricing measure involves customers using as much energy as possible when supply is plentiful and curtailing use when supply is short. A third program is demand response II, wherein customers with PV batteries or with EVs agree (in exchange for a reduced electricity rate) to have their batteries tapped into when electricity demand is high and supply short.

Ultimately it is the goal of the International Codes Council to adopt zero net energy (ZNE) codes by 2030. ZNE is achieved when homes and buildings reduce energy use to an absolute minimum and produce an equivalent amount of energy on site or off site — usually by solar and wind.

Past Energy Code: 2015 IECC

In July 2015 the Hawai‘i State Building Code Council (SBCC) unanimously approved the 2015 International Energy Conservation Code (IECC) with amendments. The code sets energy efficiency requirements for both residential and commercial buildings.

Following SBCC adoption, the state followed the Administrative Rule path to state adoption and the counties followed the County Council path to county adoption. The Administrative Rule path involved approval by the Attorney General, review by the Legislative Review Board, and approval by the Small Business Regulatory Review Board, which occurred on December 8, 2016. In 2017 SBCC voted to cease following the Administrative Rule process. Instead, once the SBCC adopts or amends a code the counties then adopt the code as is or with county amendments.

The county path involves review by the Corporation Councils followed by County Council hearings, amendments, adoption, and approval by the mayors. The code is then enforced via the plan checking and site inspection process.

Honolulu County Energy Code
Adoption of 2015 IECC with Honolulu County Amendments (PDF)

Hawai‘i County Energy Code
Adoption of 2015 IECC with Hawai‘i County Amendments (PDF)

Maui County Energy Code
Adoption of 2015 IECC with Maui County Amendments (PDF)

Kauai County Energy Code
Adoption of 2015 IECC with Kauai County Amendments (PDF)

Instructions to Purchase the 2015 IECC

The 2015 IECC is available for purchase online from the International Code Council; follow links to “Store” and “2015 International Codes and References.” The document may also be available at other online retailers. A read-only version is available on the IECC link below.

Updated Hawai‘i State Amendments and Model Code

SBCC-approved amendments to the 2018 IECC to add compliance flexibility and adapt the requirements to Hawai‘i’s unique climate.

Additional Resources

REScheckTM software
Compliance software for the residential portion of the 2015 IECC. At present it does not implement the envelope compliance options that are included in the Hawai‘i amendments. Both online and desktop versions are available.

COMcheckTM software
Commercial building compliance software for the 2015 IECC. Both online and desktop versions are available.

More Resources

Pre-2015 IECC

The adoption of the 2006 International Energy Conservation Code (IECC) marked a dramatic improvement in energy code quality. The prior energy code, adopted in 1994, was in response to the National Energy Policy Act of 1992. The residential section had few requirements and the commercial building requirements were based on the 1989 American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) standards.

The International Codes Council (ICC) was formed in 1994 and published the 2003 code with a strong residential component. The ICC has since revised building codes on three-year cycles.

In 2007 the Hawai‘i State Legislature formed the Hawai‘i Building Code Council to align Hawai‘i with ICC’s policy of updating building codes every three years. The 2006 IECC, amended to suit Hawai‘i’s unique climate, was adopted in 2009.

In the ensuing years, the Hawai‘i Building Code Council improved the national 2009 IECC and it was approved by the Council. However, the 2009 IECC was adopted only by Kauai.

>